Conducted RF Immunity Testing

Explore Our Services

Need help defining the test?

MSASPL provides conducted RF immunity testing for electronic products that may be affected by radio frequency disturbances coupled through power lines, signal lines or communication cables.

This test is useful for products used in industrial, EV, medical, telecom, IoT and commercial environments where cables can act as paths for RF interference.

What is Conducted RF Immunity Testing?

Conducted RF immunity testing evaluates whether a product can continue operating normally when RF disturbances are coupled into connected cables.

Products Suitable for Testing

Industrial controllers
Communication devices
IoT gateways
Medical electronics
EV components
Sensor systems
Embedded products

Common Failure Symptoms

Frequently Asked Questions

What is conducted RF immunity testing?

Conducted RF immunity testing evaluates whether a product continues to operate correctly when radio-frequency disturbances are coupled onto its connected cables and ports.

Which standard is commonly used for conducted RF immunity testing?

IEC 61000-4-6 is the commonly referenced basic immunity standard for conducted RF disturbances. The test frequency range, level and modulation are taken from the applicable product requirement.

How is RF disturbance coupled to the DUT?

The RF signal is injected through a suitable coupling/decoupling network or other specified coupling device selected for the cable and port under test.

What symptoms may appear during conducted RF immunity testing?

Possible symptoms include communication errors, unstable sensor readings, false switching, control malfunction, display disturbance, resets or degraded performance at particular frequencies.

How does debug support help after a conducted RF issue?

The observed failure frequency and affected cable can help narrow the investigation. Typical areas include cable shielding, common-mode filtering, grounding, connector termination, PCB return paths and sensitive analogue or communication circuits.

EMC, EMI and environmental testing support for reliable, certification-ready electronic products.

Quick Links

Working Hours

Mon - Sat: 10AM - 06PM

Sunday : Closed

Contact

+91 70584 88896

pranav@msaspl.com

Shop No. 1 & 2, Shivranjan Tower, Above Bhujbal Dairy, Someshwar Wadi, Pashan, Pune 411008

MSASPL provides standards-aligned testing, diagnostics and engineering support. Final certification, statutory approval or accredited compliance certification must be obtained from applicable accredited laboratories or certification bodies.